Fridge is a unitary system of complex networks. If there is a problem with the system, some parts need to be checked into the cause of the problem. In other words, there are some things that cause a problem on the refrigerator system. For example, something or the water that's left in the fridge is not cold or frozen, there must be a defective part. It should be noted, many factors that cause such cases. To track it, can be started from the electrical system of the refrigerator. "The use and care of the fridge"
Electricity is the main energy source driving the refrigerator components. Many cases of damage to the refrigerator occur in the electrical system. Checking was first started in the electrical outlet. Outlet is the first entry of the flow of electricity into the system. The lack of power at the outlet due to four things: the power off from the center, the main electric fuse broken, worn or burnt outlet, and connecting cable socket chipped or broken.
If the flow of electricity, plugs, and wires connecting in normal conditions, peril checking electrical voltage used refrigerator. Voltage required by the refrigerator is 110 volts (for European-made) and 220 volts. If you use a refrigerator with a working voltage of 110 volts, you should check the transformer (step-up) because of the current power supply voltage of 220 volts was used with a frequency of 50 Hz. Voltage that is required is usually written on the back of the refrigerator body. Should be checked at the compressor before to check on other components, whether there is body contact or not.
The use of a fridge is right and good maintenance can make cabinets bs durable and not easily damaged. The placement of the refrigerator should also be true. At the back of the refrigerator should be provided space to pipelines that are outside condenser is not hot. Condenser pipe should get enough air to be working perfectly. Therefore, the refrigerator should not be placed meeting with the wall. The back of the fridge strived not to touch the walls, so that the condenser pipe damage can be avoided. If the condenser touching tempok will indirectly reduce the pipe to get air from outside is quite good. Quite a good distance of approximately 20 cm from the wall. It is intended that the circulation of air in the condenser awake and allow the release of heat taken out of the cooling material (refngerant).
Giving isolator pads or mounting on refrigerator legs to prevent corrosion on the bottom of the refrigerator, it can also avoid body contact or short-circuit. Preferably, the power supply from the wall socket refrigerator is not shared with other electrical for furniture (single socket). It reduces the risk of fire due to outlet electrical current through it exceeds the maximum limit.
Do not place the refrigerator near a heat source furniture, eg stove. This causes the air around the condenser expands. As a result, the process of heat exchange in the condenser is less than optimal.
If the central power goes out, disconnect the refrigerator from the electrical outlet. This is necessary so that the compressor and components to avoid the fridge Electricity
damage, because it is feared when the central power back on, the power supply voltage is not stable. Additionally, ha! The compressor work is useful to rest, Better to fire back then to wait 10-15 Menil central electrical voltage condition has been stabilized In the first usage (new compressor), temperature setting should be adjusted gradually. That is, turn the temperature control to position 1 (without the contents of the fridge). Let it sit for about 2-3 hours. Once it is stable or compressor work in every part of the shelf temperature evenly, the temperature can be set at the position of the 2nd, 3rd, and so on. If the refrigerator is not used for a long time, the refrigerator should be stored back into the carton.
In addition, the use of the refrigerator, it should not be too frequent opening and closing the machine door cooler, a result of the frequent opening and closing the refrigerator door will cause cold air from the freezer becomes less, and the evaporator pipe will arise flowers frozen ice thus affect and hinder the cooling process.
Should storage of items such as vegetables, eggs and bottles or cans in a refrigeration room note spacing density. If too tight and crowded cold temperatures will inhibit circulation in it. Placement of goods in the refrigerator should be set, so it was not too crowded. Thus the circulation of cold temperatures evenly in all directions of space in the refrigerator.
Check and clean the condenser pipe which is behind the refrigerator (engine coolant) at least once a month. Usually the condenser pipe will be attached to the dust. If dust is left on the surface of the condenser pipe, this will affect the workings of the pipe. Cooling process will be interrupted and hampered.
Clean using a soft brush slowly and carefully.
It is recommended to check when the compressor is working in the state. Is there any damage or obstructions. Listen carefully to the sound of the engine compressor sound perhaps there is something wrong. Safety or automatic control circuits should be checked at a time. There may be some damage to parts of this series. If there is damage to the engine coolant will continue to work despite having the evaporator pipe temperature is at freezing point. The following tips "treatment refrigerator"
A CARING FOR REFRIGERATOR EVAPORATOR
On the surface of the evaporator pipes are usually in a relatively long time will tacked flowers ice and hardened. This needs to be done cleaning. To clean the surface of the evaporator pipe, to consider the following matters as this.
1 Turn off the electric motor connections (dynamo) with electricity.
2 Take a few moments to ice that sticks to the surface of the evaporator pipes thaw.
3 If the state of the ice on the surface of the evaporator pipe had melted, rub with a cloth rag that has been dampened with warm water. Never clean the evaporator pipe surface with hard or sharp objects. Do not also use chemicals. It will result in damage to the pipe.
4 In the outer space and enough refrigerator cleaned with a soft cloth moistened beforehand with warm water.
Should chunk of ice and frost on evaporato not taken out by using a sharp object. To overcome this, it can be done by disabling aktifkar freezer frost occurs when excess (in closet and semi defros no-frost). Open the refrigerator door and the evaporator, let the frost melt. Clean the drains clogged with frost
Should chunk of ice and frost on evaporato not taken out by using a sharp object. Untul overcome this, it can be done by disabling aktifkar freezer frost occurs when excess (in closet and semi defros no-frost). Open the refrigerator door and the evaporator, biarkar frost melts. Clean ai also clogged sewer frost.
B. CLEANING THE REFRIGERATOR
You need to know, not sterile refrigerator from bacteria of fungus 100%. Bacteria and fungi may be carried by food or objects that put in the fridge bacteria and fungi will die at low temperatures, but only made inactive for a while. Conditions of rising temperature in the fridge (not cold) allows bacteria and fungi active again. Therefore, the refrigerator should be kept clean and free from harmful bacteria and fungi, to clean the refrigerator or turn off the refrigerator deactivated first. Some things to consider when cleaning the refrigerator. Remove all the contents of the fridge. Clean the inside of the refrigerator with warm water using a soft cloth or sponge. To be more clean and remove stains oil leftovers should use a scented soap foam neutral so as not to spoil the aroma of food when the refrigerator is turned on. Clean also the magnetic gaskets (bulkhead insulator) refrigerator door.
C. STORING FOOD
Make sure the food or drink that will put in the fridge is at room temperature conditions. Should not store food and drinks in warm or hot. Smelling foods (such as durian) should be sealed or wrapped with aluminum foil so as not to spoil other food aroma. Fresh foods such as vegetables and fruits are not stored too long in the fridge as it will affect the taste of the food. Foods or vegetables that have been cooked up to be able to survive for 3 days without changing the taste (depending on the condition of the refrigerator). Fresh fruits and vegetables can last longer than 7 days. Avoid storing beverages glass bottles, fruits, and fresh vegetables in the evaporator (freezer space). Glass bottles may break in the freezer.
No comments:
Post a Comment